Aller au contenu
AIR-DEFENSE.NET

Ici on cause fusil


Berkut
 Share

Messages recommandés

1 hour ago, Clairon said:

Pour l'aparté sur les para-commandos belges, c'est vrai que le niveau de ces deux bataillons se situe quelque part entre le niveau des GCP et celui des paras "classiques" français.

La formation de base des paras-commandos reprend une formation d'infanterie légère poussée, suivie de plusieurs semaines (une douzaine selon les différentes docs) de formation commando à Marche les dames, pas piquée des hannetons. 

Le résultat dure plus de 9 mois, avec un fort taux d'échec (ce qui fait que les 2 bataillons para-commandos sont en sous-effectif permanent), vient ensuite l'instruction para assez unique au monde (les paras belges sont par ex. parmi les derniers à sauter depuis un balon captif, ce qui selon tous les connaisseurs est nettement plus "déroutant" que depuis un quadrimoteur volant à plus de 300 km/h). En 2011 sur plus de 240 candidats paras-commandos au début de la formation, moins de 50 % ont réussi. Ceux qui échouent ont la possibilité d'être ré-orientés vers l'infanterie médiane/chasseurs ardennais.

Clairon

Il y a aussi la possibilité d'être orienté vers l'infanterie légère (12e/13e de Ligne).

  • Upvote (+1) 1
Lien vers le commentaire
Partager sur d’autres sites

  • 2 weeks later...

 

 

 

 

http://www.militarytimes.com/articles/marines-approve-magpuls-signature-polymer-ammunition-magazine

 

Citation

The Marine Corps has approved Magpul Industries Corp.'s signature polymer ammunition magazine for use in combat and training, according to a Magpul press release. 

Magpul is a private company that manufactures weapon accessories and tactical apparel to include ammunition magazines, buttstocks, weapon sights, slings and grips.

"The Magpul GenM3 PMag was the only magazine to perform to acceptable levels across all combinations of Marine Corps 5.56mm rifles and ammunition during testing.  That magazine has, therefore, been approved for use for both training and combat," Marine Corps Systems Command (MARCORSYSCOM) told Military Times. 

Based out of Austin, Texas, Magpul’s polymer-based magazine, commonly referred to as the PMAG, has become a favorite of combat veterans and members of the special operations community since its inception in 2007. 

Its rugged dependability has made it a top performer among private competitors in the small-arms accessory sector. 

“ The PMAG is a great product … lightweight and durable. I have seen numerous special ops teams from all services pass through here, and they all use PMAGs. Also, a large amount of Marine infantry here use PMAGS, including their Force Recon elements,” said an Army infantryman deployed to Afghanistan. 

 

However, the increasing use of polymer magazines in combat theaters for deployed U.S. troops has not been without controversy. In 2012, both the Marine Corps and U.S. Army banned the use of any non-standard magazine, allowing only the government issued aluminum magazines for combat and training. 

"The specification to use "only tested, approved, and authorized magazines" was born from the Combat Marksmanship Symposium of 2012 where it was discussed that there were performance concerns with the many commercial magazines being observed during annual weapons qualifications.  Since the Army and Marine Corps are both working toward new ammunitions and/or magazines, but neither quite done, it was decided to simply reiterate that only those magazines tested by the Primary Inventory Control Activity (PICA) would be allowed until further notice," MARCORSYSCOM told Military Times.  

The polymer magazine ban was a two-fold issue stemming from untested polymer magazines appearing in the hands of Marines deployed in combat zones that were from unknown or less reliable manufacturers; and the lack of reliable testing to determine which manufacturers were producing satisfactory equipment— the safest solution was then to impose a ban, according to Duane Liptak, the Director of Product Management and Marketing at Magpul. 

In response to the Marine Corps ban on unapproved magazines in MARADMIN 668/12, Magpul issued a press release. 

“There is indeed an issue with respect to Infantry Automatic Rifle (IAR) compatibility with the first generation, and MREV, or GEN M2 PMAG, due to the IAR having an SA-80/HK416 specification magazine well as opposed to the standard, Colt-specification magazine well of other U.S. service arms. While we certainly wish the IAR was specified with a standard magazine well, it has been fielded as submitted, and this incompatibility now presents a safety and survivability issue for those Marines deployed in combat,” Magpul clarified. 

“Our current generation PMAG, the GEN M3, is fully compatible with the IAR, the M4, the M16A4, and all other 5.56 platforms in the current US inventory,” Magpul further explained. 

Since the ban, excessive testing has been performed on the PMAG GEN M3, as well as other commercial magazines, at various government facilities; and the Magpul GEN M3 PMAG has been modified from a previous version to fit into the magazine well of the M27, according to a representative at MARCORSYSCOM. 

The M27, also known as the IAR, has recently undergone testing this fall with the Marines’ experimental 3rd Battalion, 5th Marines, based out of California, as a potential replacement to the standard-issue M4 carbine.  

“Throughout this testing, the GEN M3 PMAG has had zero magazine-related stoppages through all of the tests combined, with any ammunition tested, in M4, M16, and M27 platforms, and has performed better than any other magazine tested, with all of these weapon types," Duane said in an interview with Military Times. 

"The GEN M3 PMAG also performs well with the M249 SAW when belted ammunition is not available.  As a side benefit, the GEN M3 PMAG also reduces damage to chamber face and feed ramps when using M855A1 ammunition, extending weapon life,” he said. 

The new GEN M3 PMAGs will be manufactured out of Magpul’s shipping and manufacturing center based out of Cheyenne, Wyoming. The old standard issued aluminum magazines are expected to be used for training purposes until their life cycle ends. 

 

 

 

Lien vers le commentaire
Partager sur d’autres sites

On dirait la réponse de HK au SIG MCX 

http://www.esut.de/esut/archiv/news-detail-view/artikel/das-hk433-die-neue-gewehrfamilie-von-heckler-koch/

Parmi les éléments que je relève:

- In addition, the pipes [cannon ndtr] are equipped as standard with a further developed and tool-free adjustable gas removal for operation with a signature damper.

- Regarding the principle of operation, the HK433 is an indirect gas pressure loader with short-stroke gas piston system.

- there is a maintenance-free and - according to Heckler & Koch - a non-manipulable shot counter within the housing, from which the weapon data can be transmitted wirelessly. [wtf ?!]

- The integrated G36 closure guide of the housing top ensures a consistently high functional reliability and reliability of the weapon. Constructively, the closure [verrou de culasse?] is based on that of the G36, but it is equipped with a safety catch as well as self-lubricating sliding elements

- The laterally flat, non-running through-feed lever can be converted without tools and can be operated on both sides

- A special feature is the height-adjustable shoulder support, which is equipped with a height-adjustable cheek system and whose ergonomics have been changed compared to the Slim Line shoulder rest of the HK416 and the IdZ shoulder rest of the G36. The length adjustment provides five detent positions and can therefore be dynamically adapted to the respective protective equipment of the shooter.

  • Upvote (+1) 1
Lien vers le commentaire
Partager sur d’autres sites

Le 03/02/2017 à 20:38, TimTR a dit :

- The laterally flat, non-running through-feed lever can be converted without tools and can be operated on both sides

Réciprocating ou pas ? Parce que si c'est comme sur le G-36 ou le SCAR, c'est un mauvais point avec un garde-main aussi fin. D'ailleurs le upper receiver fait vraiment penser à un mélange de G-36 et de SCAR.
Sinon c'est moche et ça fait cheap. La crosse est hideuse. Mais si ça marche... Attendons de voir.
Quant au prix trop élevé... Si ils n'avaient pas fait le G-36 aussi cheap ils n'auraient pas ce problème de devoir changer si tôt de FA.

Lien vers le commentaire
Partager sur d’autres sites

il y a 34 minutes, Patrick a dit :

Réciprocating ou pas ? Parce que si c'est comme sur le G-36 ou le SCAR, c'est un mauvais point avec un garde-main aussi fin. D'ailleurs le upper receiver fait vraiment penser à un mélange de G-36 et de SCAR.
Sinon c'est moche et ça fait cheap. La crosse est hideuse. Mais si ça marche... Attendons de voir.
Quant au prix trop élevé... Si ils n'avaient pas fait le G-36 aussi cheap ils n'auraient pas ce problème de devoir changer si tôt de FA.

A priori, non reciprocating. En tout cas, c'est comme ça que je comprends la traduction de google. TFB a l'air de penser la même chose que moi. Plutôt comme sur le G3 autant en design qu'en fonction.

Perso, je suis sceptique de cette idée que le 416 serait trop cher pour l'armée allemande (info qui vient du FB de Larry Vickers) et que HK aurait développé un nouveau fusil moins cher alors qu'il y a un peu plus de contenu technologique dedans. La source de Vickers mentionne une filiation avec le MASADA, ce qui suggérait que HK aurait peut être déterré et dépoussiéré son XM8. Auquel cas, une bonne partie des coûts de R&D sont déjà payés depuis longtemps. Une autre explication est que HK ait optimisé le design des pièces pour qu'elle soit bien moins chères produire ce qui les aurait obligé à repartir d'une feuille blanche ou en tout cas différente du 416. 

  • Upvote (+1) 2
Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Restaurer la mise en forme

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

 Share

  • Statistiques des membres

    5 967
    Total des membres
    1 749
    Maximum en ligne
    Stevendes
    Membre le plus récent
    Stevendes
    Inscription
  • Statistiques des forums

    21,5k
    Total des sujets
    1,7m
    Total des messages
  • Statistiques des blogs

    4
    Total des blogs
    3
    Total des billets
×
×
  • Créer...